Exterior Emulsion Wall Paint - E2
Matt finish exterior emulsion wall paint is normally used for large projects where requires an economical material consumption rate.
Package: 25KG / Barrel
Gloss: Matt
Matt Finish Exterior Emulsion Wall Paint
Matt finish exterior Emulsion Wall Paint is a kind of widely used water-based exterior emulsion wall paint of an economical cost. It can be used to decorate the exterior walls, with its matt finish to perform good hide coverage finish, varied color available, easy application, environmental friendly, low cost.
Properties:
Matt finish exterior emulsion wall paint is ideal for private housing developments, commercial or most industrial complexes, and house cabins.
| Product Name: | Matt Finish Exterior Emulsion Wall Paint |
| Product Code: | E2 |
| Type: | Water-based construction paint. |
| Appreance: | Liquid material |
| Main Components: | Acrylic emulsion+CaCO+TiO₂ |
| Color: | White or as per customized |
| Finish: | Matt |
| Volume: | 25kg / Barrel |
| Brushing Area: | 10 - 12 ㎡ / kg (2 coats, film thickness of single coating-30μm) |
| Abrasion Resistance: | >300 times |
| Product Standard: | GB 18582-2008; GB/T9756-2009 |
| Shelf Life: | 18 months |
| Surface Drying Time: | 0.5 hours |
| Interval Time: (for second coat) | 2 hours (Film thickness 30μm， 25-30°C) |
| Drying Time: | 1 hours |
| Curing Time: | 7 days |
| Stability of Diluted Paint: | 48 hours |
| Dilution: | 20 -25% water could be added to the paint. |
Application Range:
Weather Resistant Exterior emulsion wall paint can be used for decoration or renewal of exterior surface of new and old architecture, such as commercial buildings, hotels, villa, teaching building, residential building etc.
Surface preparation:
1. Keep the base humidity <10%, PH<10
2. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush
3. Fill any minorcracks with an appropriate filler
4. Surface should be flat and smooth
Application weather condition:
Temperature >5 degree centigrade
Relativehumidity<85%
Wind powder <4 degree
Maintenance time:
7days/25 degree centigrade ( not less than 5 degree centigrade. It is suggested to expend the maintenance time to achieve better effect.
Application method: Brush/ Roller/ spray
Attentions:
1.Mix well after paint can is opened.
2.Read the specification before using.
3.Please completely flush the eyes with clear water in case of eye contact.
4.Do not allow children and animals go into the working area and keep out of reach of children.
5.Wear the protective equipment during working if allergic to the paint.
6.Cover the overflowing paint with sand or soil and do not pour the paint into sewer in case of blockage.
7.Apply with matching primer for best performance.
8.Stop application when temperature is below 10°C, or humidity over 85%.
9.To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.
Weather Resistant Exterior emulsion wall paint can be used for decoration or renewal of exterior surface of new and old architecture, such as commercial buildings, hotels, villa, teaching building, residential building etc.
Surface preparation:
1. Keep the base humidity <10%, PH<10
2. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush
3. Fill any minorcracks with an appropriate filler
4. Surface should be flat and smooth
Application weather condition:
Temperature >5 degree centigrade
Relativehumidity<85%
Wind powder <4 degree
Maintenance time:
7days/25 degree centigrade ( not less than 5 degree centigrade. It is suggested to expend the maintenance time to achieve better effect.
Application method: Brush/ Roller/ spray
Attentions:
1.Mix well after paint can is opened.
2.Read the specification before using.
3.Please completely flush the eyes with clear water in case of eye contact.
4.Do not allow children and animals go into the working area and keep out of reach of children.
5.Wear the protective equipment during working if allergic to the paint.
6.Cover the overflowing paint with sand or soil and do not pour the paint into sewer in case of blockage.
7.Apply with matching primer for best performance.
8.Stop application when temperature is below 10°C, or humidity over 85%.
9.To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.
